MALAYSIAN SPECIFICATIONS
BITUMEN 60/70
|
Inspection |
Test Method |
Limits |
|
Density @ 15˚C, kg/1 |
- |
To report |
|
Ductility, cm |
ASTM D113 |
100 min |
|
Flash Point, ˚C |
ASTM D92 |
276 min |
|
Loss on Heating, % mass |
ASTM D6 |
0.5 max |
|
Penetration, 0.1 mm |
ASTM D5 |
60 to 70 |
|
Penetration of residue after loss on Heating, % of original |
ASTM D6/D5 |
75 min |
|
Softening Point, ˚C |
ASTM D36 |
46.0 to 57.0 |
|
Solubility in Trichloroethylene, % mass |
ASTM D2042 |
99.5 min |
|
Specific Gravity @ 25/25 ˚C |
ASTM D70 |
1.00 to 1.05 |
|
Wax Content, % mass |
UOP 46 - 85 |
2.0 max |
APPLICATION
The following temperatures are recommended for spraying and mixing when using Bitumen 60/70.
SPRAYING
160 - 200˚C & Mixing : 140 - 160˚C.
Our Bitumen 60/70 can be packed in reconditioned steel drum at 200 kg per drum.
We offer export of our product to China, Africa, India, Bangladesh, Pakistan, Indonesia, Thailand, Philippines, Vietnam, Myanmar etc.
BITUMEN 80/100
|
Inspection |
Test Method |
Limits |
|
Ductility, cm |
ASTM D113 |
100 min |
|
Flash Point, ˚C |
ASTM D92 |
225 min |
|
Loss on Heating, % mass |
ASTM D6 |
0.5 max |
|
Penetration, 0.1 mm |
ASTM D5 |
80 to 100 |
|
Penetration of residue after loss on Heating, % of original |
ASTM D6 |
80 min |
|
Softening Point, ˚C |
ASTM D36 |
45 to 52 |
|
Solubility in Trichloroethylene, % mass |
ASTM D2042 |
99 min |
|
Specific Gravity @ 25/25 ˚C |
ASTM D70 |
1.00 to 1.05 |
APPLICATION
The following temperatures are recommended fro spraying and mixing when using Bitumen 80/100.
SPRAYING
160 - 200˚C & Mixing : 140 - 160˚C.
SPECIFICATION
Bitumen 80/100 is produced as per Malaysian Standard MS124 1973
Our Bitumen 80/100 can be packed in reconditioned steel drum at 200 kg per drum.
We offer export of our product to China, Africa, India, Bangladesh, Pakistan, Indonesia, Thailand, Philippines, Vietnam, Myanmar etc.